Important: Use custom search function to get better results from our thousands of pages

Use " " for compulsory search eg:"electronics seminar" , use -" " for filter something eg: "electronics seminar" -"/tag/" (used for exclude results from tag pages)

Tags: Examinations, Regular, Semester, BTech, IV BTech I Semester Regular Examinations,
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
IV B.Tech. I Semester Regular Examinations
Post: #1

.doc  Refrigeration and Air Conditioning 4-1 Set-4 (K).doc (Size: 346 KB / Downloads: 3)

What are the desirable characteristics of a Refrigerant-Absorbent pair. [6] (Unit-III, Topic No. 3.5)
With the help of T-S and P-H charts explain the working of air refrigeration system working on Bell Colemann
cycle. [9] (Unit-I, Topic No. 1.3)
Evaluate the performance of a simple vapour compression refrigeration cycle taking into account the effect of
suction and delivery pressure. [8] (Unit-II, Topic No. 2.3)
In an ammonia vapour compression refrigerator, the temperature of refrigerator is –10°C. The vapour is condensed
in a condenser at 30°C. Find the theoretical C.O.P of the cycle when the vapour at the end of compression is 0.9
dry. Take latent heat of NH3 AT 30°C= 1442 kJ/kg, specific heat of liquid NH3 = 4.7 kJ/kg.[7] (Unit-II, Topic No. 2.3)
List out the advantages and disadvantages of air cooled condensers and water cooled condensers. [8]
(Unit-III, Topic No. 3.2)
Explain the role of CO2 and CFCs in green house effect. [7] (Unit-III, Topic No. 3.2)
With a neat sketch explain the working of Li - Br vapour absorption refrigeration system. [8] (Unit-IV, Topic No. 4.2)
Write the advantages of absorption refrigeration system over compression refrigeration system. [7]
(Unit-IV, Topic No. 4.1)
Explain with the help of graphs the effect of evaporator temperature and supply steam pressure on the
consumption of steam required per ton of refrigeration and give the causes. [8] (Unit-V, Topic No. 5.1)
With the help of a neat sketch explain the working of a steam ejector. [7] (Unit-V, Topic No. 5.1)
Atmospheric air at 101.3 kPa, 22°C, 65 percent relative humidity, is to be used to cool a transformer. The
transformer dissipates heat at a rate of 230 MJ/h. To increase the cooling effect per kilogram of dry air and
thereby decrease the amount of air needed, the air is first adiabatically saturated with water and then passed
over the transformer. If the temperature of the air leaving the transformer should not exceed 32°C, determine the
required flow rate in kilograms of dry air per hour both with and without the adiabatic saturation of the
incoming air.[10] (Unit-VI, Topic No. 6.1)
What are the factors to be considered for load estimation for air conditioning? [5] (Unit-VII, Topic No. 7.2)
Explain the requirements of comfort air conditioning. [5] (Unit-VII, Topic No. 7.1)
Define the term ‘bypass’ factor used for cooling or heating coil and find the expression for that. [10]
(Unit-VI, Topic No. 6.2)
With a neat sketch explain about year round air conditioning system. [8] (Unit-VIII, Topic No. 8.1)
An ejector refrigeration unit is to be designed to deliver 150 kg per minute of chilled water at 4° C from supply
water at 22°C. Water vapour entering the ejector has a quality of 0.97. Determine:

Quick Reply
Type your reply to this message here.

Image Verification
Image Verification
(case insensitive)
Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  refrigeration projects m tech level Guest 0 0 17-06-2017 10:59 PM
Last Post: Guest
  diploma in civil engineering 5th semester minor projects Guest 1 168 05-05-2017 03:20 PM
Last Post: jaseela123
  m tech seminar topics for digital system computer electronics Guest 1 179 03-05-2017 02:51 PM
Last Post: jaseela123
  m tech thesis in computer science rgpv bhopal format Guest 1 182 02-05-2017 02:48 PM
Last Post: jaseela123
  b tech 1st year surface chemistry notes ppt Guest 1 273 29-04-2017 04:13 PM
Last Post: jaseela123
  environmental project for m tech students Guest 1 210 25-04-2017 04:52 PM
Last Post: jaseela123
  www 6th semester automobile engineering anna university ppt Guest 1 217 21-04-2017 11:27 AM
Last Post: jaseela123
  multipath dissemination in regular mesh topology free source cod Guest 1 0 20-04-2017 04:20 PM
Last Post: jaseela123
  technical seminar topics for m tech cnis Guest 1 331 18-04-2017 04:15 PM
Last Post: jaseela123
  seminar topic of civil m tech cad structure Guest 1 237 03-04-2017 12:57 PM
Last Post: jaseela123
This Page May Contain What is IV B.Tech. I Semester Regular Examinations And Latest Information/News About IV B.Tech. I Semester Regular Examinations,If Not ...Use Search to get more info about IV B.Tech. I Semester Regular Examinations Or Ask Here