Important: Use custom search function to get better results from our thousands of pages

Use " " for compulsory search eg:"electronics seminar" , use -" " for filter something eg: "electronics seminar" -"/tag/" (used for exclude results from tag pages)


 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
mechanical engineering phd thesis topics
Post: #1

1. Energy Technology, Heat Transfer and Fluid Mechanics
2. Modelling of Cutting Forces in High Speed Ball-end Milling
3. An Efficient Solution for Scheduling Preventive Maintenance Tasks of Cogeneration Plants Using Integer Programming and Simulation
4. Structural Heath Monitoring
5. Modelling Surface Waves Using The Hypersingular Boundary Element Method
6. Oscillating vapour bubbles and heat transfer
7. Surfaces, Materials and Monitoring
8. Spray Modelling
9. Modular Design Principles for Bespoke Mechatronic Control Systems
10. Optimisation of Laser Forming Process for Tube/Sheet Bending
11. A Study of Intelligent Pulsating Blankholder Technology for Deep Drawing
12. Fibre Laser Cutting of Stents
13. Single Molecule Detection using Micro and Nano Systems
14. Crack-Free Laser Cutting of Thick-Section Ceramic Materials
15. Manufacture of Advanced Carbon Fibre Composites by Resin Transfer Moulding of Preforms
16. Fast Track Design and Reliability of Total Care Systems
17. Design, Manufacture and Robotics
18. Development of Smart Ankle-Foot-Orthosis
19. The Effect of Particulate Geometry and Quality on Direct Laser Deposition
20. Dynamic Behaviour of Cellular Solids
21. Force Modelling in High Speed Ball End Milling
22. Statistical process control of thermal spray coatings using acoustic emission
23. Nanocomposite material and coating design for micro-sensor and microacturator applications
24. Modelling Of Laser Cutting Striation Formation
25. Compressor fault detection and management
26. Thermal Transport Modelling of Woven Ceramic Matrix Composites
27. Experimental & Finite Element Modelling of High Speed Machining Process: Establishing Integrity of Model Inputs
28. BioMEMS and Nanotechnology
29. The Laser Cleaning of Aerospace Titanium Alloys for Joining
30. Laser Drilling Of Cooling Holes for Aeroengine Components
31. Investigation of lubrication and wear in engines using acoustic emission
32. Integrated Information Systems to Support Quality Management
33. Investigation on the Mechanisms of the Strain Growth Phenomenon in Containment Vessels Subjected to Internal Blast Loading
34. The Use of Parameter Identification Methods for the Condition Monitoring of Electric Motor Drives
35. The Computation Three-Dimensional, Time-Dependent Flows in Rotating Cavities, using High-Reynolds-number Models of Turbulence
36. Development of a New, Multiple Pulsed Percussion Laser Drilling Mathematical Model
37. Investigation of Osteoporosis in the Biomechanical Performance of the Dynamic Distraction Frame
38. BioMEMS for Cell Studies
39. The Influence of the Osteoporosis in The Mechanical Behavior of Hip Replacements
40. Mechanical Behaviour of Rubber Toughened Polymers over a Wide Range Of Strain Rate and Temperature
41. Physics-based modelling for analysis and diagnostics
42. Reliability and Maintainability of High Speed Packaging
43. Effect of Vibration in Cancer Cells -
44. Combined Wire and Powder Deposition in Direct Laser Metal Additive Manufacturing
45. Residual Stresses Induced with Thermal Spraying
46. Micro Milling of Hardened Tool Steel: Process Fundamentals & Extended Life Tool Coatings
47. High Speed Fibre Laser Cutting and Machining
48. Design Analysis & Synthesis of a Non-conventional Parallel Manipulator with Innovative Joints
49. A Study of Electro-Discharge Drilling using gas dieiectrics
50. Transport of Non-physical Variables for Multiphase-change & Solidification Modelling
51. Modelling and Analysis of Melt Pool Effects in Laser Cladding
52. Development of Smart Cloth
53. Combined Laser and Mechanical Micro-Drilling of Nickel-Base Super-Alloy
54. Dynamics of Long Rod Penetration
55. A Study of the Thermal Error in Turning Due to Cutting Tool Expansion
56. In-Process Electrochemical Discharge Dressing of Metal-Bonded Diamond Grinding Wheels
57. Statistical Experimental Analysis of a Two-Fluid Sprayer and Its Use to Develop the Number Size Distribution Moments Model of Sprays
58. Moulding of a fan blade composite material using various manufacturing processes
59. Crashworthiness of Sandwich Panels
60. Electrical Dressing of Grinding Wheels
61. Laser Cutting of Carbon Fibre Composite Materials
62. Design & Manufacture of Electromagnetically Unobtrusive Composite Radome Structures
63. Thermoacoustic Technologies for Energy and Building
64. Manufacturing Optimisation + Quality Improvement for Small Orifice Manufacture in Engine Components
65. Photodynamic Therapy on Keloids
66. Foam-Filled Corrugated Board Manufacture
67. The Effect of the Skin Tension on the Formation of Keloid Scars - PhD Student - Edna Suarez Pozos
68. Optimum Tool Paths for Two and Half Milled Components
69. Modelling & Failure Analysis of Ferritic Steel Used in Pressure Vessels & Piping Applications
70. Finite Element Analysis of Cutting Tool Boundary Effects in Dry High Speed Machining
71. Effect of Non-Conventional Beam Geometry in Laser Processing of Engineering Materials
72. Design Optimisation & Health Monitoring Techniques for Composite Structures
73. Laser Cutting of Material of Non-Uniform Thickness
74. Improved Modelling of Fires
75. The Effects of Rayleigh Waves on Improving the Surface Finish of Castings
76. Stratified Multi-Phase Flow Behaviour in Vertical and Horizontal Pipes
77. Local Impact Effects of Hard Projectiles on Concrete Targets
78. Turbulence Modelling for Free-Surface and Costal Flow Simulations
79. Laser Surface Texturing and Coating of Ti-6Al-4V for Improving Biocompatibility
80. Renewable Energy
81. Simulation of Human Model -
Post: #2
Dynamics of Carbon Nanotube based strain sensors
Post: #3
Respected sir.
i am M.Tech (production Engineering ) 2nd year student. i am search in thesis topic in production related.
so pl help me . i am very oblizied to you .
my email id is:- gopal1784[at]gmail.com
Post: #4
to get information about the topic "mechanical engineering phd thesis topics" related topic refer the link bellow

http://project-seminars.com/Thread-mecha...r-students

http://project-seminars.com/Thread-mecha...opics-list

http://project-seminars.com/Thread-mecha...oads-list1

http://project-seminars.com/Thread-proje...g-students
Post: #5
Respected sir,
I am in need of M.Tech-Production engineering thesis topic. Please help me sir.
Thanx.
My email id is- ipreet07[at]gmail.com
Post: #6
Hi, i really need a phd thesis topic in area of Mechanical engineering (Design and Manufacturing option). I will really appreciate it if i can get one from you.
Thanks
Post: #7
Respected sir
I want phd thesis topic in mechanical engg. related to vibration, condion monitoring,design
my mail id is- mina_shinde1234[at]rediffmail.com
thank you
mrs. shinde m.y.
Post: #8
To get full information or details of mechanical engineering phd thesis topics please have a look on the pages



http://project-seminars.com/Thread-mecha...sis-topics

http://project-seminars.com/Thread-mecha...arch-ideas

http://project-seminars.com/Thread-mecha...r-students

http://project-seminars.com/Thread-mecha...opics-list

http://project-seminars.com/Thread-mecha...oads-list1

http://project-seminars.com/Thread-proje...g-students




if you again feel trouble on mechanical engineering phd thesis topics please reply in that page and ask specific fields in mechanical engineering phd thesis topics
Post: #9
hi sir iam jagadeesh.b i need phd thesis realted design projects
Post: #10
Spray Modelling data needed
 

Marked Categories : thermal engineering, ph d synopsis in mechanical engg, dissertation topics in manufacturing, finite element analysis thesis report of mechanical engg, thrsis on mechanical, thesys in thermal engineering pdf, mechanical engg phd topics, latest topics in phd in mechanical engineering, phd topic for mechanical engg design, topic for phd in mechanical engg design, topic for phd in mechanical engg, topic for ph d research in engineering, engineering phd topics, mechanical engineering phd thesis subjects 2011, phd topics mechanical engineering, phd thesis in mechanical engineering, dissertation topics for mechanical turning, research topics in mechanical design,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Image Verification
(case insensitive)
Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  www list of seminar topics for tool and die engineering Guest 0 0 23-06-2017 07:10 PM
Last Post: Guest
  topics for visitors management system Guest 0 0 22-06-2017 09:48 PM
Last Post: Guest
  m1 textbook for engineering mathematics author s panduranga pdf Guest 0 0 22-06-2017 06:33 PM
Last Post: Guest
  seminar topic for master of tool die engineering Guest 0 0 22-06-2017 08:33 AM
Last Post: Guest
  good seminar topics on food spoilage Guest 1 0 22-06-2017 02:55 AM
Last Post: Guest
  6th sem vtu mechanical scanner pdf free download Guest 0 0 19-06-2017 07:17 PM
Last Post: Guest
  seminar topics on clean electricity pdf Guest 0 0 16-06-2017 09:44 AM
Last Post: Guest
  seminar topics in entomology Guest 0 0 15-06-2017 05:39 PM
Last Post: Guest
  internship report of mechanical enggineering students on kmml Guest 1 0 14-06-2017 03:06 PM
Last Post: jaseela123
  mechanical worm gear bottle jack pdf Guest 6 1,541 09-06-2017 11:38 AM
Last Post: Guest
This Page May Contain What is mechanical engineering phd thesis topics And Latest Information/News About mechanical engineering phd thesis topics,If Not ...Use Search to get more info about mechanical engineering phd thesis topics Or Ask Here

Options: