Important: Use custom search function to get better results from our thousands of pages

Use " " for compulsory search eg:"electronics seminar" , use -" " for filter something eg: "electronics seminar" -"/tag/" (used for exclude results from tag pages)


Tags: Using, Safety, Oilrig, Offshore, Offshore Oilrig Safety Using PLC,
 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Offshore Oilrig Safety Using PLC
Post: #1

Drilling for oil is one of the greatest technological breakthroughs in recent decades, once oil or gas is discovered, a production platform will replace the offshore drilling rig, which is assembled at the location using heavy lift cranes situated on a barge. These production platforms come in a variety of sizes, shapes, and types, which depend on the dimensions of field, the depth of the water and how far the oil and/or gas field is from shore. Usually the platforms are typically located in 150 to 350 feet of water, up to 10 miles offshore. These platforms are generally made of steel and fixed in the seabed with steel "post". These platforms harbor the entire well and can house a maximum of 80 workers. In addition platforms have concrete structure large enough to store oil, with gravity keeping them situated on the seabed.

Weather is a major factor in platform operation. When high sea and hurricanes approach a platform the crew must evacuate to prevent injury or loss of life. Thus safety is an important factor as far as an oilrig is concerned. Oil and gas production must continue on an uninterrupted manner to ensure profitability. To further this end, labor-intensive, repetitive task such as opening and closing valves, monitoring levels, and shut down of platform to prevent equipment damage are handed over to programmable logic controllers (PLC's).
To know about the control action of PLC the knowledge of its hard ware, its operation and ladder diagram is important.

2. THE PROGRAMMABLE LOGIC CONTROLLER (PLC)
A PLC is a special form of microprocessor-based controller that uses a programmable memory to store instructions and to implement functions such as logic, sequencing, timing, counting, and arithmetic in order to control machines and processes. When the PLC is programmed, the controller then monitors the inputs and outputs according to this program by turning on\off its output.

PLC's have the great advantage that the same basic controllers can be used with the wide range of control systems. To modify a control system and the rules that are to be used, all that is necessary is to change the program. There is no need to rewire. PLC's are similar to computers but whereas computers are optimized for calculation and display task, PLC's are optimized for control tasks and industrial environment.
The primary reason for using PLC's is to eliminating the large cost involved in replacing the complicated relay based machine control systems. Such a control system is called a relay sequencer or relay logic panel.

In earlier days of industrial control process, discrete state control where provided by physical relays to put together a circuit that satisfies the requirement of a ladder diagram. The ladder diagram technique of describing discrete state control systems originated from relay logic system that is why the diagram contains so many relay related terms and symbols. The ladder diagram is still used because it has evolved into an efficient method of defining the event sequences required in a discrete state control system. It is important to realize that, relay control each rung of the ladder is evaluated simultaneously and continuously, because the switches and relays are all hard wired to ac power. If any switch in ladder change state the consequence is immediate this is not true in the case of computer based programmable controllers.

The main reason for eliminating relays where due to its increase in cost involved in replacing the complicated relay based machine control systems. Since relays are mechanical devices they had fewer lifetimes. Troubleshooting is also difficult when so many relays where used. When a relay panel has been wired to implement a ladder diagram for a special purpose, if the event sequence is to be changed it is necessary to rewire all, or part of the panel.
Post: #2
could you pls send full seminar report of Offshore Oilrig Safety Using PLC to my mail id: mail2rahulrs[at]gmail.com
Post: #3
To get full information or details of Offshore Oilrig Safety Using PLC please have a look on the pages

http://project-seminars.com/Thread-offsh...-using-plc

if you again feel trouble on Offshore Oilrig Safety Using PLC please reply in that page and ask specific fields in Offshore Oilrig Safety Using PLC
 

Marked Categories : offshore oilrig safety using plc, offshore drilling engineering project topics,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Image Verification
(case insensitive)
Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  matlab code for speech compression using dwt Guest 0 0 26-06-2017 06:14 PM
Last Post: Guest
  steganography using dwt matlab code Guest 0 0 25-06-2017 03:49 PM
Last Post: Guest
  download leaky bucket implementation using opengl Guest 0 0 25-06-2017 11:28 AM
Last Post: Guest
Rainbow Multi Banking Project using .net Suvendu1986 5 4,936 24-06-2017 07:43 PM
Last Post: Guest
  documentation of mobile cell phone charger using ic 555 download in pdf Guest 0 0 23-06-2017 11:48 PM
Last Post: Guest
  concealed weapon detection using image processing ppt Guest 0 0 21-06-2017 06:54 PM
Last Post: Guest
  block diagram mobile cell phone charger using ic 555 ppt Guest 2 1,201 21-06-2017 04:03 PM
Last Post: Guest
  gas leakage detection using gsm full ppt free download Guest 0 0 19-06-2017 09:41 AM
Last Post: Guest
  automatic night lamp with morning alarm using 8086 assembly language program Guest 0 0 15-06-2017 11:39 AM
Last Post: Guest
  automatic temperature controller for fan using thermistor pdf Guest 1 0 12-06-2017 02:49 PM
Last Post: jaseela123
This Page May Contain What is Offshore Oilrig Safety Using PLC And Latest Information/News About Offshore Oilrig Safety Using PLC,If Not ...Use Search to get more info about Offshore Oilrig Safety Using PLC Or Ask Here

Options: